System information

Adit 3000 CLI - Release 1.6 4-39
Global Configuration Mode
no commands
no ipsec vpn_ipsec
Use the no ipsec vpn_ipsec command to delete an IPSec connection.
To create an IPSec connection, see ipsec net-to-host command on page 4-21 or ipsec net-to-net
command on page 4-22
To enter an IPSec connection, for configuration see ipsec vpn_ipsec command on page 4-22.
Syntax: (config)# no ipsec ipsec connection-id
Example: (config)# no ipsec ipsec 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no interface multilink
Use the no interface multilink command denies access to the MLPPP configuration commands.
To enter the Multilink interface configuration mode, see the interface multilink command on
page 4-18.
Syntax: (config)# no interface multilink group-number
Example: (config)# no interface multilink 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no interface serial
Use the no interface serial command denies access to the serial port configuration commands. To
enter the Serial interface configuration mode, see interface serial command on page 4-18.
Syntax: (config)# no interface serial port
Example: (config)# no interface serial 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
connection-id Enter the name of a connection.
Field Definition
group-number Enter current multilink group number. Range = 1.
Note: Currently only 1 multilink port is supported.
Field Definition
port Range is 1-4.