System information

Adit 3000 CLI - Release 1.6 4-35
Global Configuration Mode
no commands
no date summer-time
Use the no date summer-time command to remove daylight savings time setting. To enable
daylight savings, see date summer-time command on page 4-7.
Syntax: (config)# no date summer-time
Example: (config)# no date summer-time
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no dial-peer voice pots fxs
Use the no dial-peer voice pots fxs command denies access to the Dial Peer Voice POTS FXS
configuration commands. To allow access, see dial-peer voice command on page 4-9.
Syntax: (config)# no dial-peer voice pots fxs port
Example: (config)# no dial-peer voice pots fxs 2 1
Supported Platforms:
Adit 3104, Adit 3500
no dial-peer voice pots trunk
Use the no dial-peer voice pots trunk command denies access to the Dial Peer Voice POTS trunk
configuration commands. To enable access, see dial-peer voice command on page 4-9.
Note: This command is not supported on the Adit 3104.
Syntax: (config)# no dial-peer voice pots trunk port tag
Example: (config)# no dial-peer voice pots trunk 2 1
Supported Platforms:
Adit 3500
Field Definition
port Selects the port to configure.
Adit 3104 FXS - Range is 1-24.
Adit 3500 FXS - Range is 1-4.
Field Definition
port Selects the port to configure. Trunk - Range 1-4
tag Set destination range. Range is 1-30.