System information

Adit 3000 CLI - Release 1.6 4-33
Global Configuration Mode
no commands
no commands
no access
Use the access command to disable remote access via LAN or WAN. To enable remote access, see
access command on page 4-3.
Syntax: (config)# no access {lan|wan}
Example: (config)# no access lan
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no access-control
Use the no access-control command to remove an access rule for the system. To add an access rule,
see access-control command on page 4-3.
Syntax: (config)# no access-control name
Example: (config)# no access-control AccessControl1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
lan Disable access to the unit via the LAN.
wan Disable access to the unit via the WAN.
Field Definition
name Enter a current Access Control (Scheduler Rule).