System information

Adit 3000 CLI - Release 1.6 4-29
Global Configuration Mode
log
log t1 buffer
Use the log t1 buffer command to set the buffer size allowed for the T1 log buffer.
Syntax: (config)# log t1 buffer kilobytes
Example: (config)# log t1 buffer 24
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
log t1 notify
Use the log t1 notify command to set the remote T1 notify level.
Syntax: (config)# log t1 notify {error|info|ip-address address
|none|warn}
Example: (config)# log t1 notify warn
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
kilobytes Set the size of the T1 log buffer. Range is 1 - 256 KB. Default is
16KB.
Field Definition
error Notify for error level.
info Notify for information level.
ip-address address Enter IP address of remote system to notify.
none No notification.
warn Notify for warning level.