System information

4-24 Adit 3000 CLI - Release 1.6
Global Configuration Mode
key
key
Use the key command to enable a specific keyed feature. To acquire a feature key code, contact Carrier
Access Customer Support.
Syntax: (config)# key key-code
Example: (config)# key
q0B8yma2IsSL+1BarY0u
Supported Platforms: Adit 3104, Adit 3200, Adit 3500
l2tpc
Use the l2tpc command to allow access to the VPN L2TP Connection configuration commands. See
Chapter 14, Configuration - L2TPC Mode for commands in this mode. To delete an existing connection,
see no l2tpc command on page 4-40.
Syntax: (config)# l2tpc {l2tpc connection-id|source-ip address local-
secret secret [ipsec]}
Example: (config)# l2tpc l2tpc 1
(config-l2tpc-1)#
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
key-code
The key code is entered to enable the specific feature.
Field Definition
connection-id Enter the connection ID (number).
local-ip address Enter the IP address of the destination.
local-secret secret Enter a secret password used to authenticate L2TP connection.
Maximum number of characters is 96.
ipsec Optional parameter. Directs IPSec to create an L2TP connection.