System information

Adit 3000 CLI - Release 1.6 4-7
Global Configuration Mode
date
date set
Use the date set command to manually set the Adit’s internal clock.
Syntax: (config)# date set hh:mm:ss dd mm yyyy
Example: (config)# date set 05:00:00 04 17 2006
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
date summer-time
Use the date summer-time command to update the clock for daylight savings time. To stop the
update for daylight saving, see no date summer-time command on page 4-35.
Note: Default settings are start: 3/28 time 00:00, end 10/28 time 01:00 (for 2006).
Syntax: (config)# date summer-time smonth sday shh:mm emonth eday ehh:mm
offset
Example: (config)# date summer-time 03 28 00:00 10 28 01:00 60
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
hh:mm:ss Set the time in the 24 hour format hh:mm:ss
hh = hours, range is 0 - 23
mm = minutes, range is 0 - 59
ss = seconds, range is 0 - 59
dd dd = day, range is 1 - 31
mm mm = month, range is 1 - 12
yyyy Enter current year (example 2006). Range 1970 - 2037.
Field Definition
smonth and emonth The month in which daylight savings time starts (smonth) or ends
(emonth). Range is 1-12.
sday and eday The day on which daylight savings time starts (sday) or ends (eday).
Range is 1-31.
shh:mm and ehh:mm Start time (shh:mm) and end time (ehh:mm).
hh = hour, range 00:59
mm = minutes, range 00:59
offset This is an optional parameter, to set the offset of the daylight savings
time. Range is 1-120, with a default of 60.