System information

4-6 Adit 3000 CLI - Release 1.6
Global Configuration Mode
date
date
date
Use the date command to display the Adit’s current date.
Syntax: (config)# date
Example: (config)# date
Mon May 1 05:33:57 2006
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
date auto-time-update
Use the date auto-time-update command to automatically update the clock from the defined
server. To stop the auto update, see no date auto-time-update command on page 4-34.
Syntax: (config)# date auto-time-update protocol {ntp|tod} server
address1 [address2] [address3] [address4] update-every hours
Example: (config)# date auto-time-update protocol ntp server 192.168.1.1
update-every 24
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
ntp Network Time Protocol protocol. Default.
tod Time of Day protocol.
address1, address2,
...
Enter the IP Address of the Time Server. Additional addresses may be
added, for backup if the primary Time Server fails.
hours Sets the amount of time between resets. Range 1-480 hours. Default is
24 hours.