System information

CHAPTER
4
Global Configuration Mode
The Global Configuration Mode allows commands to be entered directly the router configuration. From
this level, additional configuration modes can be entered. Once configuration is complete, use exit/end
command to return to the Privileged prompt. Note: The Trunk option is not available on the Adit 3104.
This Mode is entered with the # configure terminal command from the Privileged mode
The Global Configuration Mode is represented by the (config)# prompt.
Configuration Mode Commands
 Commands to Configuration Sub-Commands
 Global Configure Commands
-
access - interface ethernet - pptps
- access-control - interface multilink - radius-client
- access-list - interface serial - remote-admin
- authentication login - ipsec - router ospf
- clock source - ip dhcp pool ethernet - security-default
- controller t1 - ip domain-name - security-log
- date - ip host - service
- delete local-server - key - snmp-server
- dial-peer voice - l2tpc - static-dns
- dmz-host - local-server - time-range
- do - log - username
- dynamic-dns - mail-server - vlan (global)
- end - nat-bypass - vlan (vlan-id)
- exit - network-object - voice-codec
- help - no commands - voice-port (global)
- history - port-trigger service - voice-port trunk
- host-filter - pptpc - voice-service sip