System information

3-58 Adit 3000 CLI - Release 1.6
Privileged Mode
traceroute
traceroute
Use the traceroute command to trace a route to a remote host.
Syntax: Adit 3500> traceroute
Syntax: Adit 3500> traceroute {address|hostname|stop}
Example: Adit 3500> traceroute to 192.168.1.200
(192.168.1.200), 10 hops max
1 192.168.1.200 (192.168.1.200) 10.500 ms 1.013 ms 0.926 ms
Traceroute: Destination Reached
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
upgrade
Use the upgrade command to upgrade the system software on the Adit. Note: This requires the TFTP
software to be running in the background.
Syntax: # upgrade ip-address address file filename [check]
Example: # upgrade ip-address 192.168.1.1 file adit3500_1_0.rmt
WARNING: Upgrade starting. Do NOT issue new commands until done
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
address IP address of the remote host.
hostname Host name of the remote host.
stop Stop the traceroute process.
Field Definition
address IP address of the TFTP server with the software upgrade file.
filename Name of the software file to load on the system, this is a .rmt file.
check Check only. Verify that the file is a software image file. Do not store
the file as the software image