Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 25-11
Configuration - Voice Service SIP Mode
outbound-proxy
Use the Voice Service SIP outbound-proxy command to configure the SIP outbound proxy. To disable
outbound proxy, see no outbound-proxy command on page 25-9.
Syntax: (config-voice-serv-sip)# outbound-proxy {hostname hostname|
ip-address address}
Example: (config-voice-serv-sip)# outbound-proxy ip-address
192.168.1.140
Supported Platforms:
Adit 3104, Adit 3500, MSR
phone-number
Use the Voice Service SIP phone-number command to configure the phone number maximum size.
Syntax: (config-voice-serv-sip)# phone-number max-size number
Example: (config-voice-serv-sip)# phone-number max-size 11
Supported Platforms:
Adit 3104, Adit 3500, MSR
prack
Use the Voice Service SIP prack command to enable Provisional Acknowledgement (PRACK), as per
RFC 3262. To disable PRACK, see no prack command on page 25-9.
Syntax: (config-voice-serv-sip)# prack enable
Example: (config-voice-serv-sip)# prack enable
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field Definition
hostname Enter the host name of the outbound proxy.
address Enter the IP address of the outbound proxy.
Field Definition
number Enter the maximum size for the phone number. Range 3 - 24.