Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 24-9
Configuration - Voice Port Trunk Mode
no digit-map
Use the Voice Port Trunk no digit-map command to disable digit map on the trunk. To configure
digit map, see digit-map command on page 24-3.
Syntax: (config-vport-trk-{n})# no digit-map
Example: (config-vport-trk-1)# no digit-map
Supported Platforms:
Adit 3500, MSR
no echo-cancel
Use the Voice Port Trunk no echo-cancel command disable echo cancellation on this port. To
enable echo cancellation, see echo-cancel command on page 24-5.
Syntax: (config-vport-trk-{n})# no echo-cancel
Example: (config-vport-trk-1)# no echo-cancel
Supported Platforms:
Adit 3500, MSR
no registration enable
Use the Voice Port Trunk no registration enable command disable trunk registration. To enable
registration, see registration enable command on page 24-12.
Syntax: (config-vport-trk-{n})# no registration enable
Example: (config-vport-trk-1)# no registration enable
Supported Platforms:
Adit 3500, MSR