Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

CHAPTER

Configuration - Voice Port Trunk Mode

The Voice Port Trunk Configuration commands allow the user to configure the Voice Port Trunk

parameters. Enter this sub-group with the (config)# voice-port trunk number command from the

Configuration mode. Note: The Trunk option is not supported on the Adit 3104 or the Adit 3200.

The Voice Port Trunk commands are represented by the (config-vport-trk-{n})# prompt.

Voice Port Trunk Commands

• comfort-noise

• connection lcc

• connection t1

• description

•digit-map

•do

• echo-cancel

•end

• exit

•history

• input-gain

• isdn switch-type (PRI)

• no commands

• output-gain

• registration

• signal

•trunk