Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

CHAPTER
22
Configuration - Voice Port Mode
The Voice Port Configuration commands allow the user to configure the Voice Port parameters.
Enter this sub-group with the (config)# voice-port command from the Configuration mode.
The Voice Port commands are represented by the (config-vport)# prompt.
Note: There are two additional Voice Port groups (FXS-Chapter 23 and Trunk-Chapter 24), please see
their respective chapters for information.
Voice Port Commands
• digit-map (global)
•do
•end
• exit
•history
• no digit-map (global)
•tos