Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

CHAPTER
18
Configuration - PPTPS Mode
The PPTP Server Configuration commands allow the user to configure the VPN (Virtual Private
Network) Point-to Point Tunneling Protocol Server parameters.
Enter this sub-group with the (config)# pptps command from the Configuration mode.
The VPN PPTP Server commands are represented by the (config-pptps)# prompt.
PPTP Server Commands
•do
•end
• end-address
•exit
•history
•idle-time
• no commands
• ppp authentication
• ppp encryption
• shutdown
• start-address