Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

17-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - PPTPC Mode
no sip-alg
Use the PPTP Client no sip-alg command to disable SIP ALG on this interface. To enable SIP ALG,
see sip-alg command on page 17-23.
Syntax: (config-pptpc-{n})# no sip-alg
Example: (config-pptpc-1)# no sip-alg
Supported Platforms:
Adit 3104, Adit 3500, MSR
ppp authentication
Use the PPTP Client ppp authentication command to configure the support of authentication types for
the password. To disable PPP authentication, see no ppp authentication command on page 17-17.
Syntax: (config-pptpc-{n})# ppp authentication {chap|ms-chap|
ms-chapv2|pap}
Example: (config-pptpc-1)# ppp authentication chap
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ppp encryption
Use the PPTP Client ppp encryption command to configure the PPP encryption. To disable PPP
encryption, see no ppp encryption command on page 17-17.
Syntax: (config-pptpc-{n})# ppp encryption {40-bit|128-bit}
Example: (config-pptpc-1)# ppp encryption 40-bit
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
chap Support Challenge Handshake Authentication (CHAP)
ms-chap Support Microsoft CHAP (MS-CHAP).
ms-chapv2 Support Microsoft CHAP Version 2 (MS-CHAPv2).
pap Support an unencrypted password.
Field Definition
40-bit Support Encryption (40 bit keys)
128-bit Support Maximum Strength Encryption (128 bit keys)