Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

14-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - IPSec Mode
no hash
Use the IPSec no hash command to disable a hash algorithm. To set a hash algorithm, see hash
command on page 14-6.
Syntax: (config-ipsec-{n})# no hash {md5|sha}
Example: (config-ipsec-1)# no hash md5
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no ip rip
Use the IPSec no ip rip command to disable RIP.
Syntax: (config-ipsec-{n})# no ip rip
Example: (config-ipsec-1)# no ip rip
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no ipsec-manual
Use the IPSec no ipsec-manual command to enable automatic key exchange method. To enable manual
key exchange method, see ipsec-manual command on page 14-8.
Syntax: (config-ipsec-{n})# no ipsec-manual
Example: (config-ipsec-1)# no ipsec-manual
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no netbios
Use the IPSec no netbios command to disable routing of NetBIOS broadcasts. To enable NetBIOS
broadcasts, see netbios remote-brc-addr command on page 14-11.
Syntax: (config-ipsec-{n})# no netbios
Example: (config-ipsec-1)# no netbios
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
md5 Disable the MD5 algorithm.
sha Disable SHA1. SHA = Secure Hash Algorithm.