Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

14-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - IPSec Mode
ipsec-conn
Use the IPSec mode ipsec-conn command to enable or disable an IPSec connection without removing
it.
Syntax: (config-ipsec {n})# ipsec-conn {disable|enable}
Example: (config-ipsec-1)# ipsec-conn enable
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ipsec-manual
Use the IPSec mode ipsec-manual command to select manual key exchange method. To enable
automatic key exchange method, see no ipsec-manual command on page 14-14.
Syntax: (config-ipsec {n})# ipsec-manual
Example: (config-ipsec-1)# ipsec-manual
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
key
Use the IPSec key command to set the shared secret key.
Syntax: (config-ipsec {n})# key key
Example: (config-ipsec-1)# key mysecret
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
disable Disable the IPSec connection.
enable Enable the IPSec connection.
Field Definition
key Enter a shared secret key, with a maximum of 30 characters.