Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

13-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Serial Interface Mode
schedule-availability
Use the Serial Interface schedule-availability command to apply a schedule rule to this interface. To
delete a schedule, see no schedule-availability command on page 13-20.
Syntax: (config-int-ser-{n})# schedule-availability time-range
schedule-id
Example: (config-int-ser-1)# schedule-availability time-range 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
shutdown
Use the Serial Interface shutdown command to disable the serial interface. To set the serial interface
up (In-Service), see no shutdown command on page 13-20.
Syntax: (config-int-ser-{n})# shutdown
Example: (config-int-ser-1)# shutdown
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
sip-alg
Use the Serial Interface sip-alg command to enable SIP ALG. To disable SIP ALG, see no sip-alg
command on page 13-20.
Syntax: (config-int-ser-{n})# sip-alg enable
Example: (config-int-ser-1)# sip-alg enable
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field Definition
schedule-id Enter an existing schedule rule name. See time-range command on
page 4-62 to set the schedule-id