Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-23
Configuration - Serial Interface Mode
ppp restart-timer
Use the Serial Interface ppp restart-timer command to configure the PPP restart timer.
Syntax: (config-int-ser-{n})# ppp restart-timer seconds
Example: (config-int-ser-1)# ppp restart-timer 15
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ppp time-btwn-reconnect
Use the Serial Interface ppp time-btwn-reconnect command configure the time between reconnect
attempts.
Syntax: (config-int-ser-{n})# ppp time-btwn-reconnect seconds
Example: (config-int-ser-1)# ppp time-btwn-reconnect 15
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ppp username
Use the Serial Interface ppp username command set the PPP Login User Name. To delete a PPP user,
see no ppp username command on page 13-20.
Syntax: (config-int-ser-{n})# ppp username username
Example: (config-int-ser-1)# ppp username test-user-name
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
seconds Range is 1 - 65535 seconds. Default is 3 seconds.
Field Definition
seconds Set the interval of time between reconnect attempts.
Range is 0 - 99999 seconds. Default is 30 seconds.
Field Definition
username Enter the Username, with a maximum of 19 characters.