Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-25
Configuration - Multilink Interface Mode
sip-alg
Use the Multilink Interface sip-alg command to enable SIP ALG. To disable SIP ALG, see no sip-alg
command on page 12-20.
Syntax: (config-int-mlink-{n})# sip-alg enable
Example: (config-int-mlink-1)# sip-alg enable
Supported Platforms:
Adit 3104, Adit 3500, MSR