Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

12-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Multilink Interface Mode
ppp username
Use the Multilink Interface ppp username command set the PPP Login User Name. To delete a PPP
user, see no ppp qos interleaving command on page 12-19.
Syntax: (config-int-mlink-{n})# ppp username username
Example: (config-int-mlink-1)# ppp username test-user-name
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
schedule-availability
Use the Multilink Interface schedule-availability command to apply a schedule rule to this interface.
To delete a schedule, see no schedule-availability command on page 12-20.
Syntax: (config-int-mlink-{n})# schedule-availability time-range
schedule-id
Example: (config-int-mlink-1)# schedule-availability time-range 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
shutdown
Use the Multilink Interface shutdown command to disable the multilink port. To set the Multilink port
up (In-Service), see no shutdown command on page 12-20.
Syntax: (config-int-mlink-{n})# shutdown
Example: (config-int-mlink-1)# shutdown
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
username Enter the Username, with a maximum of 19 characters.
Field Definition
schedule-id Enter an existing schedule rule name. See time-range command on
page 4-62 to set the schedule-id