Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

12-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Multilink Interface Mode
description
Use the Multilink Interface description command to set the description for this Multilink interface.
Syntax: (config-int-mlink-{n})# description text
Example: (config-int-mlink-1)# description MLPPP1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
text Enter a description for the Multilink interface with a maximum of 64
characters.