Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 11-23
Configuration - Ethernet Interface Mode
no tos ip
Use the Ethernet Interface no tos ip command to disable IP TOS marking. To enable TOS marking,
see tos command on page 11-25.
Syntax: (config-int-eth-{n})# no tos ip
Example: (config-int-eth-1)# no tos ip
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
release
Use the Ethernet Interface release command to release the DHCP lease.
Syntax: (config-int-eth-{n})# release
Example: (config-int-eth-1)# release
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
remote-admin
Use the Ethernet Interface remote admin command to enable Remote Access on this interface. To
disable remote access, see no remote-admin command on page 11-22.
Syntax: (config-int-eth-{n})# remote-admin enable
Example: (config-int-eth-1)# remote-admin enable
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
renew
Use the Ethernet Interface renew command to renew the DHCP lease.
Syntax: (config-int-eth-{n})# renew
Example: (config-int-eth-1)# renew
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR