Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

11-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Ethernet Interface Mode
ip secondary-dns
Use the Ethernet Interface ip secondary-dns command to configure the secondary DNS. To delete a
secondary DNS address, see no ip secondary-dns command on page 11-21.
Syntax: (config-int-eth-{n})# ip secondary-dns address
Example: (config-int-eth-1)# ip secondary-dns 192.168.1.200
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
metric
Use the Ethernet Interface metric command to configure the Metric of the IP network on this interface.
Syntax: (config-int-eth-{n})# metric metric
Example: (config-int-eth-1)# metric 150
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
address Enter the IP address of the secondary Domain Name Server (DNS).
Field Definition
metric Range is 0-255, with a default is 10.