Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 6-7
Configuration - T1 Controller Mode
lbo
lbo long
Use the Controller T1 lbo long command to set Line Build Out on the T1.
Syntax: (config-cont-t1-{n})# lbo long {-7.5db|-15db|-22.5db}
Example: (config-cont-t1-1)# lbo long -15db
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
lbo short
Use the Controller T1 lbo short command to set Line Build Out on the T1.
Syntax: (config-cont-t1-{n})# lbo short {133|266|399|533|655}
Example: (config-cont-t1-1)# lbo short 266
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
-7.5db CSU attenuation for LBO of 7.5dB
-15db CSU attenuation for LBO of 15dB
-22.5db CSU attenuation for LBO of 22.5dB
Field Definition
133 DSX-1 equalization for 0-133 ft. Default.
266 DSX-1 equalization for 133-266 ft.
399 DSX-1 equalization for 266-399 ft.
533 DSX-1 equalization for 399-533 ft.
655 DSX-1 equalization for 533-655 ft.