Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 6-5
Configuration - T1 Controller Mode
fdl
Use the Controller T1 fdl command to set line Facilities Data Link (FDL) capabilities the T1 interface.
Syntax: (config-cont-t1-{n})# fdl {none|t1.403}
Example: (config-cont-t1-1)# fdl none
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
framing
Use the Controller T1 framing command to set the framing option for the designated T1.
Syntax: (config-cont-t1-{n})# framing {d4|esf}
Example: (config-cont-t1-1)# framing d4
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
none Disable FDL output messages. Default.
t1.403 Enable T1.403 FDL performance messages.
Field Definition
d4 D4 Superframe (SF)
esf Extended Superframe. Default.