Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

6-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - T1 Controller Mode
description
Use the Controller T1 description command to set the circuit ID of the T1.
Syntax: (config-cont-t1-{n})# description text
Example: (config-cont-t1-1)# description T1#1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
text Enter a description for the Controller T1.