Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

4-66 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
voice-port trunk
Use the voice-port trunk command to allow access to the Voice Port Trunk configuration commands.
See Chapter 24, Configuration - Voice Port Trunk Mode for commands in this mode. To remove access
to a Voice Port Trunk, see no voice-port trunk command on page 4-52.
Syntax: (config)# voice-port trunk port
Example: (config)# voice-port trunk 1
(config-vport-trk-1)#
Supported Platforms:
Adit 3500, MSR
voice-service sip
Use the voice-service sip command to allow access to the Voice Service SIP configuration commands.
See Chapter 25, Configuration - Voice Service SIP Mode for commands in this mode.
Syntax: (config)# voice-service sip
Example: (config)# voice-service sip
(config-serv-sip)#
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field Definition
port FXS voice port trunk number. Value must be 1.