Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

4-64 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
vlan (vlan-id)
Use the vlan command to allow access to the VLAN port configuration commands. See Chapter 21,
Configuration - VLAN Port Mode for commands in this mode.
Syntax: (config)# vlan v-id
Example: (config)# vlan 100
(config-vlan-100)#
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
voice-codec
Use the voice-codec command to select which codecs are to be enabled and allows the user to set the
Packetization Time for that codec. To disable a codec, see no voice-codec command on page 4-52.
Syntax: (config)# voice-codec {g711alaw|g711ulaw|g729}
ptime {10|20|30|40|50|60|70|80}
Example: (config)# voice-codec g711alaw ptime 30
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field Definition
v-id VLAN identifier. Range 2-4096.
Field Definition
g711alaw G.711, 64kbps, A-law
g711ulaw G.711, 64kbps, μ-law
g729 G.729, 8kbps
ptime Set the Packetization Time for the codec. Default for all is 20.
Packetization Time for each codec is as follows:
G.711A-Law = 10, 20, 30, 40, 50 or 60
G.711μ-Law = 10, 20, 30, 40, 50 or 60
G.729 = 10, 20, 30, 40, 50, 60, 70 or 80