Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-49
Global Configuration Mode
Global Configuration Commands
no security-log
Use the no security-log command to remove a security policy. To add a security policy, see
security-log command on page 4-58.
Syntax: (config)# no security-log setting
Example: (config)# no security-log accepted-outgoing-connection
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
setting
Accepted Events accepted-in-connects Disable incoming connections logging.
accepted-out-connects Disable outgoing connections logging.
Blocked Events block-conn-attempts Disable block connection attempts logging.
blocked-fragments Disable blocked fragments logging.
defrag-error Disable defragmentation errors logging.
echo-chargen Disable echo chargen logging.
icmp-flood Disable ICMP flood logging.
icmp-multicast Disable ICMP multicast logging.
icmp-redirect Disable ICMP redirects logging.
icmp-replay Disable ICMP replay logging.
multicast-broadcast Disable multicast broadcasts logging.
pkt-illegal-opts Disable packet illegal options logging.
spoofed-connection Disable spoofed connection logging.
syn-flood Disable syn flooding logging.
udp-flood Disable UDP flooding logging.
winnuke Disable winnuke configuration logging.
Other Events rem-admin-attempts Disable remote admin attempts logging.
connection-states Disable connection states logging.
Log Buffer prevent-log-overrun Disable log overrun prevention logging.