Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

4-42 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
no ipsec vpn_ipsec
Use the no ipsec vpn_ipsec command to delete an IPSec connection.
To create an IPSec connection, see ipsec net-to-host command on page 4-23 or ipsec net-to-net
command on page 4-24
To enter an IPSec connection, for configuration see ipsec vpn_ipsec command on page 4-24.
Syntax: (config)# no ipsec ipsec connection-id
Example: (config)# no ipsec ipsec 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no interface multilink
Use the no interface multilink command denies access to the MLPPP configuration commands.
To enter the Multilink interface configuration mode, see the interface multilink command on
page 4-20.
Syntax: (config)# no interface multilink group-number
Example: (config)# no interface multilink 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no interface serial
Use the no interface serial command denies access to the serial interface configuration commands.
To enter the serial interface configuration mode, see interface serial command on page 4-20.
Syntax: (config)# no interface serial port
Example: (config)# no interface serial 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
connection-id Enter the name of a connection.
Field Definition
group-number Enter multilink group number.
Adit 3104, Adit 3200, Adit 3500: Value must be 1.
MSR: Range = 1-8.
Field Definition
port Adit 3104: Value must be 1.
Adit 3200, Adit 3500: Range = 1-4.
MSR: Range = 1-8.