Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-33
Global Configuration Mode
Global Configuration Commands
mail-server
mail-server authentication enable
Use the mail-server authentication enable command to enable the outgoing mail server
authentication. To disable the mail-server authentication, see no mail-server authentication
command on page 4-44.
Syntax: (config)# mail-server authentication enable
Example: (config)# mail-server authentication enable
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
mail-server from-address
Use the mail-server from-address command to set the outgoing mail server from an e-mail
address.
Syntax: (config)# mail-server from-address address
Example: (config)# mail-server from-address [e-mail]
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
mail-server host
Use the mail-server host command to set the outgoing mail server.
Syntax: (config)# mail-server host address
Example: (config)# mail-server host 192.168.1.1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
address Enter the "from e-mail" address.
Field Definition
address Outgoing mail server IP address.