Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

4-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
ipsec log ike
Use the ipsec log ike command to enable Internet Key Exchange (IKE) related logs. To disable IKE
logging, see no ipsec log ike command on page 4-40
Syntax: (config)# ipsec log ike {auto-key|ike-int|ike-msg|msg-byte|
msg-enc-dec|msg_inp|msg-outp|pri-key|rej-packet}
Example: (config)# ipsec log ike msg-outp
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
auto-key Enable verbose automatic keying.
ike-int Enable verbose IKE IPSec interaction.
ike-msg Print all IKE message ignoring rate limit.
msg-byte Enable message’s raw byte option.
msg-enc-dec Enable message’s encryption and decryption.
msg_inp Enable message’s input structure.
msg-outp Enable message’s output structure.
pri-key Enable verbose private key.
rej-packet Enable verbose IKE reject packets.