Adit 3000 Series and Multi-Service Router (MSR) Card CLI Referece Manual

4-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
date timezone
Use the date timezone command to set the time zone and the number of hours from the GMT.
Syntax: (config)# date timezone hh:mm
Example: (config)# date timezone -05:00
The example will set the time zone offset to be -5:00 from GMT (Greenwich Mean Time),
which equates to Eastern Standard Time.
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Note: By default, Time of Day management for the MSR is provided by the Adit 600 controller.
Use this command with the MSR only if you are using NTP or another time service and need to
manually adjust the time due to a loss of contact with the server.
delete local-server
Use the delete local-server command to delete a local server.
Syntax: (config)# delete local-server server-id
Example: (config)# delete local-server 192.168.1.200
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
hh Hour offset from GMT. Range is from -12 to +12, with a default of 0.
mm Minute offset from GMT in minutes. Range is from 00 to 59, with a
default of 00. This is used for half hour time zones.
Field Definition
server-id Server ID.