Specifications

SOUND ATTACK 2009 CP51
Gehäuseempfehlungen (Nur 1 bis 2 besonders geeignete Vorschläge pro Tieftöner. Diverse andere gute Gehäuse sind meistens möglich!)
Cabinet suggestions (Only 1 to 2 particularly suitable suggestions for each bass speaker. Various other good cabinets are possible in most cases!)
Chassis / Speakers RAPTOR-15MK2 RAPTOR-12MK2 RAPTOR-6 SONIC-15 SONIC-12 SONIC-10
BR-Liter / BR litres 120 60 10 100 65 35
BR-Rohr / BR tubes 4 x MBR-85* 2 x MBR-85* 1 x MBR-50** 3 x MBR-85* 2 x MBR-85* 1 x MBR-85*
BR-Länge / Tube length ca. / approx. 45 cm ca. / approx. 45 cm ca. / approx. 25 cm ca. / approx. 45 cm ca. / approx. 45 cm ca. / approx. 33 cm
Weniger druckvoll als im Bassreflexgehäuse aber dafür bei mittleren Pegeln präziser: / Less powerful as in the bass-reflex cabinet, but therefore more precise at medium levels:
Geschl. Gehäuse ca. 60 Liter ca. 25 Liter – ca. 50 Liter ca. 30 Liter ca. 15 Liter
Closed cabinet approx. 60 litres approx. 25 litres – approx. 50 litres approx. 30 litres approx. 15 litres
RAPTOR-15MK2 RAPTOR-12MK2 RAPTOR-6 SONIC-15 SONIC-12 SONIC-10
* oder ähnliches Rohr (Daten siehe Seite CP48); ** oder ähnliches Rohr (Daten siehe MONACOR INTERNATIONAL Hauptkatalog oder www.monacor.com)
* or similar tube (specifications on page CP48); ** or similar tube (specifications in the main catalogue from MONACOR INTERNATIONAL or at www.monacor.com)
Modell RAPTOR-15MK2 RAPTOR-12MK2 RAPTOR-6 SONIC-15 SONIC-12 SONIC-10
Impedanz (Z) 4Ω 4Ω 4Ω 2x2Ω 2x2Ω 2x2Ω
Resonanzfrequenz (fs) 31Hz 34Hz 53Hz 25Hz 27Hz 31Hz
Max. Frequenzbereich f3-300Hz f3-300Hz f3-800Hz f3-300Hz f3-300Hz f3-300Hz
Maximale Belastbarkeit 1500W
MAX
1500W
MAX
300W
MAX
2x800W
MAX
2x600W
MAX
2x500W
MAX
Nennbelastbarkeit (P) 1000W
RMS
1000W
RMS
100W
RMS
2x400W
RMS
2x350W
RMS
2x300W
RMS
Mittl. Schalldruck (1W/1m) 89dB 87dB 88dB 88dB 85dB 84dB
Nachgiebigkeit (Cms) 0,1mm/N 0,1mm/N 0,38mm/N 0,13mm/N 0,14mm/N 0,14mm/N
Bewegte Masse (Mms) 260g 211g 23g 310g 250g 188g
Mechanische Güte (Qms) 8,5 7,87 2,2 10,86 11,2 8,25
Elektrische Güte (Qes) 0,75 0,56 0,43 0,52 0,49 0,53
Gesamtgüte (Qts) 0,69 0,52 0,36 0,50 0,47 0,49
Äquivalentvolumen (Vas) 87 l 32l 6,9 l 126 l 51 l 24 l
Gleichstromwiderst. (Re) 3,4Ω 3,4Ω 3,4Ω 2x1,9Ω/1x3,8Ω 2x1,9Ω/1x3,8Ω 2x1,9Ω/1x3,8Ω
Kraftfaktor (BxL) 15,53 Tm 16,6 Tm 7,6 Tm 19Tm 19Tm 17Tm
Schwingspulenind. (Le) 1,1mH 1,1mH 0,6mH 2x0,7mH/1x2,8mH 2x0,7mH/1x2,8mH 2x0,7mH/1x2,8mH
Schwingspulendurchm. 77mm 77mm 25mm Ø 75mm Ø 75mm 75mm
Schwingspulenträger GSV GSV Kapton Kapton Kapton Kapton
Lineare Auslenkung (X
MAX
) ±13,5mm ±13,5mm ±9mm ± 25mm ± 25mm ±25mm
Eff. Membranfläche (Sd) 810cm
2
470cm
2
113cm
2
830cm
2
511cm
2
346cm
2
Magnetgewicht 172oz. 172oz. 30oz. 180oz. 180oz. 180oz
Gewicht 13,8kg 13,1kg 2,4kg 15,6kg 15kg 14,5kg
Model
Impedance (Z)
Resonant frequency (fs)
Max. frequency range
Music power
Power rating (P)
SPL (1W/1m)
Suspension compl. (Cms)
Moving mass (Mms)
Mech. Q factor (Qms)
Electr. Q factor (Qes)
Total Q factor (Qts)
Equivalent volume (Vas)
DC resistance (Re)
Force factor (BxL)
Voice coil induct. (Le)
Voice coil diameter
Voice coil former
Linear excursion (X
MAX
)
Eff. cone area (Sd)
Magnet weight
Weight
Modell DT-284 DT-284S CRB-50 CRB-40 CRB-30
Impedanz (Z) 4Ω 4Ω 4Ω 4Ω 4Ω
Resonanzfrequenz (fs) 1300Hz 1300Hz 1500Hz 1800Hz 2500Hz
Max. Frequenzbereich fx-20000Hz fx-20000Hz fx-20000Hz fx-20000Hz 3000-20000Hz
Empf. Trennfrequenz (12dB) 2000Hz 2000Hz 3000Hz 3500Hz Weiche im Lieferumfang
suppl. w. crossover network
Maximale Belastbarkeit 100W
MAX
100W
MAX
80W
MAX
80W
MAX
100W
MAX
Nennbelastbarkeit 60W
RMS
60W
RMS
40W
RMS
40W
RMS
50W
RMS
Mittl. Schalldruck (1W/1m) 91dB 91dB 93dB 90dB 90dB
Schwingspulendurchmesser 28mm 28mm 25mm 20mm 19mm
Magnetdurchmesser 36mm 36mm 24,5mm 19,5mm 18mm
Einbauöffnung 45mm 46mm div./var. div./var. div./var.
Einbautiefe 21mm 21mm div./var. div./var. div./var.
Abmessungen Ø 60mm Ø 51mm ca. 50mm 45mm Ø 33,5mm x 13,5mm
Gewicht 170g 180g 90g 45g 60g
Model
Impedance (Z)
Resonant frequency (fs)
Max. frequency range
Rec. crossover freq. (12dB)
Music power
Power rating
SPL (1W/1m)
Voice coil diameter
Magnet diameter
Mounting cutout
Mounting depth
Dimensions
Weight