Instruction manual

11
O p e r a t i o n a n d I n s tr u c t i o n M a n u a l
Granita Machine Page
4. To operate, press main power switch
and agitator switch to ON position
(Figure 12). NOTE: The agitator
switch must be to ON position
before setting to liquid or slush
mode.
4.1 For slush, press the cooler switch
to bottom position ( II / ).
4.2 For liquid, press the cooler switch
to up position ( I / ) . If the
machine is being used as a liquid
cooler, it is provided with an
inside thermostat for controlling
the liquid temperature.
Note that your machine is
equipped with a time delay
relay that provides for a four
minute delay from the time of
the initial start. This is to
prevent the compressor from
short cycling. Once the
compressor is ON, the green
light will be on.
Note: The cooler switch is a three
position switch and in order to
have the compressor off, all the
cooler switches need to be in the
middle position.
5. To illuminate the mix tank cover
display on top of the unit and the
product in the bowl press the display
light switch to down position ( I / ).
CAUTION: IF THE MACHINE IS
STOPPED AT NIGHT WITH ICE IN THE
TANK, REMOVE ALL ICE SLABS
BEFORE STARTING.
Figure 12
HOW TO OPERATE (cont’d)
1 bowl
2 bowls
LEFT RIGHT
3 bowls
LEFT
MIDDLE RIGHT