Technical information

PUSHBUTTON PANEL
The machine has a diaphragm pushbutton panel on the front side. Each button has a symbol representing the corre-
sponding function:
Rev. 3/98
CARPIGIANI Operation Manual - LB 302, LB 502, LB 1002, LB 302 G, LB 502G, LB 1002 G
Page 9
Ref. 4 Push-button CLEANOUT
When pressed, it just controls beater rotation, while the freezing system is cut
out.
Three minutes after inserting this function, the machine automatically sets to
"STOP" in order to avoid an excessive wear of beater and barrel.
Ref. 5 Push-button DISPENSE
When pressed, it controls beater rotation at high speed for an easy dispense of
the product .
Attention!
Three minutes after selecting and inserting this function, the machine
automatically sets to STOP in order to avoid an excessive wear of beater and
barrel.
Ref. 6 Push-button ICE CREAM PRODUCTION
When pressed, it automatically controls beater and compressor running.
Ice cream consistency is controlled by CARPIGIANI exclusive electronic
system called HARD-O-TRONIC, through which the best ice cream
processing value can be reached.
Ref.7 Push-button STOP
When pressing it, machine stops.
Attention!
If the machine is left in STOP more than 30 minutes and no other push-button
is pushed, the electronic card automatically switches off in order to reduce
energy consumption.
Press STOP in order to turn on the machine.