Technical information

Rev. 12/2002
CARPIGIANI Operation Manual - LB 302, LB 502, LB 1002, LB 302 G, LB 502 G, LB 1002 G
Page 21
BEATER DISASSEMBLY (MODELS LB 302G - LB 502G - LB
1002G)
• Remove beater with care, paying attention not to dam-
age the sliding shoes.
Perform this operation with extreme care.
The beater may be damaged if it falls to the ground
or is impacted against another object.
• Disassemble sliding shoes, completely (ref. Fig. 29).
• Remove the beater lip seal from its seat on the beater
shaft (ref. Fig. 29).
• The sliding shoes mounted on the beater are "self-ad-
justing". An accurate cleaning ensures the system will
perform in full working order.
Beater
seal
Sliding
shoes
Figure 28
Figure 29
Beater mounted on models: LB 302 G - LB 502 G - LB 1002 G
FRONT DOOR DISASSEMBLY
• Lift the door locking lever and shift it to the right (ref. Fig. 30).
• Open the door by rotating it on its hinge (ref. Fig. 30).
Figure 30
Figure 31
• Lift the door and remove it (ref. Fig. 31).
• To perform cleaning operations, remove all movable parts
and seal with barrel.