Warranty
Please read the following operating instructions carefully. They will help you to get
the best performance from this professional quality vacuum cleaner and to
maintain it in optimum condition.
Follow these simple steps for easy and effective
operation of the Backpack vacuum.
Open the lid and ensure that the cloth bag is correctly located and the flexible
ring provides a proper seal when the lid is closed. For optimum
filtration, it is advisable to use a paper vacuum bag in addition to the standard
cloth bag.
If you use a paper vacuum bag, simply insert it into the cloth bag, making sure
that the cardboard disk is centered on the flexible sealing ring. When you replace
the lid, the short nozzle in the center of the lid will be forced into the central hole
of the cardboard disk of the paper vacuum bag thus providing a tight seal. Make
sure the paper vacuum bag is tightly secured over the short nozzle before
vacuuming.
Lock the lid down with the two latches. Always ensure that the vacuum bag i
s
empty before vacuuming. Your Backpack vacuum comes equipped with a Manual
Reset Thermal Fuse Protector. This thermal protector is designed to protect your
Backpack vacuum from overheating due to a cutoff in airflow (i.e. clogged hose).
Should this situation occur, the thermal fuse protector will safely shut off your
Backpack vacuum to avoid any potential damage.
To reset the thermal fuse:
1. Unplug the vacuum cleaner. Locate and correct the problem (over filled bag,
clog in hose, clogged filters, etc.).
2. Locate "tripped" fuse the small red button located on the bottom of the main
body.
3. Using a pencil, paper clip, or other pointy object, push the reset button.
4. Plug Backpack vacuum in and begin using.
In addition, your Backpack vacuum has been fitted with a thermal overload switch
to protect the motor against damage should the airflow be blocked for extended
periods. This may occur if the vacuum bag is overfull or if the vacuum hose is
blocked. The vacuum motor will stop before it can get
too hot. If this happens,
empty and thoroughly clean the vacuum bag or free any blockage and ensure
that adequate airflow is restored. The motor will automatically restart after it has
cooled to a safe operating temperature.
1. The vacuum hose is fitted into the cuff in the lid. It should not
be necessary to remove the hose in normal operation.
2. Place the Backpack vacuum on your back, adjust the shoulder straps
until you feel comfortable and then tighten the waist belt. The
Backpack vacuum is designed to ride higher on your back for
maximum comfort.
3. Plug the cord into a 110 volt, grounded outlet. Always unwind the cord
completely before vacuuming. It is important to maintain the power
cord in good condition. This unit ships with a 50' 16AWG x 3 conductor
SJT extension cord. Always use a 16x3 SJT extension cord when
operating this unit. Use care when pulling the cord around sharp
edges and through doorways
Never operate the Backpack vacuum if the power cord is damaged in
any way.
4. Attach the extension wand to the hose and fit the floor tool or
any of the other vacuuming accessories on the wand.
5. Turn the vacuum on. The switch is located on the side of the machine.
Turn off main power
switch and unplug unit
from wall outlet.
Remove vacuum hose
from top of unit.
Release the two
latches and lift off lid.
Separate lid from paper
bag insert and dispose
of paper bag.
Remove cloth filter bag,
clean, dust and replace.
Insert new paper bag
making sure to align lid
nozzle with bag hole and
replace latches.
OPERATION INSTRUCTIONS
Please read the following operating instructions carefully. They will help you to get
the best performance from this professional quality vacuum cleaner and to
maintain it in optimum condition.
Follow these simple steps for easy and effective
operation of the backpack vacuum.
Open the lid and ensure that the cloth bag is correctly located and the flexible
ring provides a proper seal when the lid is closed. For optimum filtration, it is
advisable to use a paper vacuum bag in addition to the standard cloth bag.
If you use a paper vacuum bag, simply insert it into the cloth bag, making sure
that the cardboard disk is centered on the exible sealing ring. When you replace
the lid, the short nozzle in the center of the lid will be forced into the central
hole of the cardboard disk of the paper vacuum bag thus providing a tight seal.
Make sure the paper vacuum bag is tightly secured over the short nozzle before
vacuuming. Lock the lid down with the two latches. Always ensure that the
vacuum bag is empty before vacuuming.
Your backpack vacuum comes equipped with a manual reset thermal fuse
protector. This thermal protector is designed to protect your backpack vacuum
from overheating due to a cutoff in airow (i.e. clogged hose). Should this
situation occur, the thermal fuse protector will safely shut off your backpack
vacuum to avoid any potential damage.
How To reset the thermal fuse:
1. Unplug the vacuum cleaner. Locate and correct the problem (over filled bag,
clog in hose, clogged filters, etc.).
2. Locate "tripped" fuse, the small red button located on the bottom of the main
body.
3. Using a pencil, paper clip, or other pointy object, push the reset button.
4. Plug backpack vacuum in and begin using.
In addition, your backpack vacuum has been fitted with a thermal overload switch
to protect the motor against damage should the airflow be blocked for extended
periods. This may occur if the vacuum bag is overfull or if the vacuum hose is
blocked. The vacuum motor will stop before it can get too hot. If this happens,
empty and thoroughly clean the vacuum bag or free any blockage and ensure
that adequate airflow is restored. The motor will automatically restart after it has
cooled to a safe operating temperature.
1. The vacuum hose is fitted into the cuff in the lid. It should not be necessary to
remove the hose in normal operation.
2. Place the backpack vacuum on your back, adjust the shoulder straps until
you feel comfortable and then tighten the waist belt. The backpack vacuum is
designed to ride higher on your back for maximum comfort.
3. Plug the cord into a 110 volt, grounded outlet. Always unwind the cord
completely before vacuuming. It is important to maintain the power cord in
good condition. This unit ships with a 50' 16AWG x 3 conductor SJT extension
cord. Always use a 16x3 SJT extension cord when operating this unit. Use care
when pulling the cord around sharp edges and through doorways.
Never operate the backpack vacuum if the power cord is damaged in any way.
4. Attach the extension wand to the hose and fit the floor tool or any of the other
vacuuming accessories on the wand.
5. Turn the vacuum on. The switch is located on the side of the machine.
Turn off main power switch and
unplug unit from wall outlet.
Release the two latches and
lift off lid.
Remove cloth filter bag, clean,
dust and replace.
1. Release the two latches and lift off
the lid.
2. Remove the cloth filter bag and paper
bag insert.
3. Pull the lter cover up and out.
4. Remove the used HEPA Media filter
and replace.
5. Snap the lter cover into place.
6. Replace the cloth filter bag and paper
bag insert.
Remove vacuum hose from top
of unit.
Separate lid from paper bag
insert and dispose of paper
bag.
Insert new paper bag making
sure to align lid nozzle with bag
hole and replace latches.
1. Remove the filter cover on the bottom
of the vacuum.
2. Remove the used filter and replace.
3. Replace the lter cover.
How To Change the Bag
How To Replace the HEPA Media Filter
How To Replace The Exhaust Filter