Use and Care Manual

10
• Keep machine and all accessories clean and in good operating condition�
• Replace the bag when it is 2/3 full�
• Replace the filters once a year or as needed�
• Always use genuine Carpet Pro filters and parts, as use of other products may result in poor cleaning or filtration
performance� Carpet Pro filtration products are designed for maximum performance�
• Store machine carefully in a dry area�
• For optimum cleaning performance and safety, follow your owner’s manual�
For Best Performance
Troubleshooting
Problem Check Point Possible Solution
Suction power is
weak.
• Vacuum bag
• Wand or hose
• Filters
• If the vacuum bag is 2/3 full, replace it.
• If clogged or blocked, remove the object.
• Clean or replace filters.
The vacuum does
not work.
• Power cord Insert the power plug firmly into an
electrical outlet.
Sudden loss of
power.
• Thermal reset Turn off vacuum and unplug from
electrical outlet. Let vacuum cool down for
at least 30 minutes before turning back on.
Check for clogs. Replace vacuum bag.
Dirt and debris are
blowing through
exhaust vent.
• Filters Make sure filters are clean, dry and
installed correctly.
All other service should be performed by an Authorized Carpet Pro Service Center.