Use and Care Manual

6
Fig. 1
How to Replace the Vacuum Bag
How to Replace the Vacuum Filters
Fig. 2
Fig. 3
Always operate the vacuum cleaner with a bag installed properly� Change
the vacuum bag when the full bag indicator appears or when suction power
is weak� The bag compartment lid will not close without a bag in the holder
or if the bag is not properly installed�
1� Open the bag compartment lid�
2� Remove the bag by sliding the cardboard collar out of the bag
holder (Fig 1)�
3� Slide a new bag into the bag holder until it is fully inserted�
4� Close the bag compartment lid�
When to Change the Filters
At a minimum, it’s recommended to replace the filters after using 12 vacuum
bags� If someone in your household is sensitive to airborne allergens, it is
recommended to change the filters after every six vacuum bags�
How to Replace the Foam Filter
1� Open the bag compartment lid�
2� Remove the used filter by grasping the tab and sliding it out (Fig� 2)�
3� Insert a new filter and close the bag compartment lid�
NOTE: The filters cannot be washed and reused�
How to Replace the Secondary Filter
1� Open the bag compartment lid�
2� Remove the bag by sliding the cardboard collar out of the bag holder�
3� Locate the filter behind the vacuum bag�
4� Pull the filter up and out of the bag compartment and discard (Fig� 3)�
5� Insert a new filter into the holder, replace the bag and close the bag
compartment lid�