Use and Care Manual

Please check each item below if you have trouble with your vacuum�

Unplug the vacuum from the power supply before servicing�

Problem Check Point Possible Solution

Suction power is weak. • Vacuum bag • If vacuum bag is full, replace it.

• Wand or hose • If clogged or blocked,

remove the object�

The vacuum does not work. • Is the hose adapter inserted • Insert hose until it snaps

into the suction opening of into place�

the vacuum completely?

• When the vacuum bag is full • Turn the vacuum off and

or any of the accessories are unplug the vacuum�

blocked, the overheating Check the vacuum

protection for the motor bag and accessories

is activated� and remove any

blockages� The vacuum

can be turned on again after

approximately 20 minutes�

Power cord does not rewind. • Power cord • Pull the power cord out a

little and press the cord

rewind button again�

Power cord won’t pull out of • Power cord • Do not pull it out by force.

the vacuum� Rewind it a little by

pressing the cord rewind

button and try pulling it

out again�

Troubleshooting Guide

For Best Performance

• Keep machine and all accessories clean and in good operating condition.

• Replace filters after using 6 to 12 vacuum bags or more frequently if vacuuming fine powders such as flour

or drywall dust�

• Always use genuine filters and parts, as use of other products may result in poor cleaning and filtration

performance� Carpet Pro filtration products are designed for maximum performance�

• Store machine carefully in a dry area.

• For optimum cleaning performance and safety, follow your owner’s manual.