User's Guide

Thuraya SatBridge Smart Terminal User Guide Information to User
Page 6 of 387
EMC/Wireless Standards
This product meets the requirements of the following standards for sensitive electrical
equipment:
• FCC 47 CFR Part 15B: Class B Emissions
• FCC 47 CFR Part 15.247: 2412-2462 MHz, 2.4GHz and 5GHz WiFi
• FCC 47 CFR Part 25: 1.5 and 1.6 GHz Satellite Systems
• EN 55032/24, EN 300 328, EN 301 893, EN 300 440, EN 301 444, EN 303 413 &EN 62311
Electromagnetic Compatibility
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC). These requirements and limits provide reasonable
protection against harmful interference when the product is operated in the intended
operational electromagnetic environment.
Harmful interference may occur in some installations, when the product is connected to a
peripheral device or test object, or if the product is used in residential or commercial areas. To
minimize interference with radio and television reception and prevent unacceptable
performance degradation, install and use this product in strict accordance with the instructions
in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by Carnegie
Technologies could void your authority to operate it under your local regulatory rules.
How to contact support
For Support, please contact your Service Partner.
Additionally, you may also reach Thuraya Customer Care at the following contacts: -
Email: [e-mail]
Call: 100 (From Thuraya network) OR [phone] (From other networks)
Fax: [phone]
Additional Resources
<TBD: To update the information with website of product.>