User's Guide

Thuraya SatBridge Smart Terminal User Guide Upgrading Thuraya SatBridge Smart Terminal
Page 378 of 387
d. You can install the firmware update to the Thuraya SatBridge at any time after
the firmware update is downloaded to your mobile device. If you want to update
Thuraya SatBridge now, then proceed
e. Connect the Thuraya SatBridge to AC Power and charge internal batteries to at
least minimum 50% to start the update when you are ready to install the
firmware update.
NOTE: The SatBridge App does not allow a firmware update on Thuraya SatBridge
unless it is on AC Power and has at least 50% charge on internal batteries.
f. Tap Update Now when you are ready to start the update. The firmware update
begins, as depicted in the image below.