User's Guide

Thuraya SatBridge Smart Terminal User Guide Introduction
Page 374 of 387
emergency (if initiated within the SatBridge App), and whether the SOS was triggered on the
device or in the app.
SOS LEDs
Color
State
SOS not initiated
Off
Off
Transmitting SOS message to GEOS emergency provider after SOS
button is pressed (initiation or cancellation)
Green
Double Pulse
Once the SOS request is received by GEOS emergency provider and
Thuraya SatBridge receives acknowledgement, the SOS LED lights
solid green until SOS is active
Green
Solid
Confirmed SOS Cancellation
The SOS LED lights for 10 seconds and then turns off.
Red
Solid
SOS message failure. The SOS LED lights for 10 seconds after a
message failure and then turns off.
This enables the user to retry the SOS.
Red
Pulse
NOTE: The location provided to emergency services will be the location of the
Thuraya SatBridge whether SOS was activated on SatBridge App or SatBridge
Terminal
The Thuraya SatBridge conserves power in SOS mode. The conservation depends on the power
source it is connected to. Below are items to note about how the Thuraya SatBridge manages
power during an SOS event.
NOTE: When the unit is in SOS mode, all temperature protections will be suspended
(operational, charge, and discharge protections) and the user can manually
intervene., if required
Connected to Power
When the Thuraya SatBridge is plugged in to an AC power outlet:
• The SOS message will be sent every 15 minutes until it is acknowledged by GEOS.
• The unit will continue to stay on the AC power.
Connected to Battery
When the Thuraya SatBridge Smart Terminal is on battery power:
• 5Ghz and USB charging are turned off.