Manualshelf

User's Guide

ManualsBrandsCarnegie Technologies ManualsComputers & AccessoriesSatBridge Satellite transceiver / WiFi Access Point
371372373374375376377378379380
Thuraya SatBridge Smart Terminal User Guide Introduction
Page 371 of 387
On AC
Power
Supply
On External
Rechargeable
Battery Pack
On Internal Batteries
More than 80%
Charge
Less than
80% Charge
Satellite Connection
Yes
Yes
Yes
Yes
2.4 GHz Wi-Fi
On
On
On
On
5 GHz Wi-Fi
On
Off
On
Off
USB Charging
On
Off
On
Off
Internal Battery Charging
Yes
No
–
–
• The internal batteries recharge when connected to an AC power source, whether or not
the device is powered on. When the internal batteries are fully charged, the Thuraya
SatBridge stops charging the batteries.
• If an external battery pack is connected, the power shall be drawn from the external
battery pack; internal battery power shall not be charged or discharged. Once the
external battery pack power is exhausted, power transitions to the internal battery
packs without interruption.
• USB charging is provided through USB port on the front of Thuraya SatBridge when
Thuraya SatBridge is connected to an AC power source or internal batteries until they
are above 80% charge. You can connect mobile devices for USB charging
Approved External Batteries
Only approved battery packs should be used with the Thuraya SatBridge. These approved
battery packs are provided in the following list from RRC Power Solutions:
• RRC-SMB-UBC: SMBUS Universal battery charger and power cord
• RRC2040-2: Standard battery pack RRC2040-2 (3S2P) with 11.25V / 6.40Ah / 72.0Wh
• RRC2054: Standard battery pack RRC2054 (4S1P) with 15.00V / 3.20Ah / 48.0Wh
• RRC2040: Standard battery pack RRC2054 (3S1P) with 11.25V / 2.95Ah / 33.2Wh
Care and Maintenance for Thuraya SatBridge Smart Terminal
• The cable between the Satellite Antenna and the Wi-Fi Hotspot should be removed
when transporting the Thuraya SatBridge.
• Avoid placing your Thuraya SatBridge close to cigarettes, open flames, or any heat
source.
• Use only a soft damp cloth to clean your Thuraya SatBridge.
• To avoid impaired Wi-Fi Hotspot performance, ensure your terminal’s antenna is not
damaged or covered with foreign material like paint or labelling.