User's Guide

Thuraya SatBridge Smart Terminal User Guide Introduction
Page 15 of 387
You can separate the Wi-Fi Hotspot unit from the Thuraya SatBridge. To do so, firmly grasp the
Wi-Fi Hotspot and pull it out of the Satellite Antenna docking ring with a slightly twisting motion.
NOTE: You may wish to separate the Wi-Fi Hotspot and the Satellite Antenna
for a variety of reasons—usually because the Satellite Antenna can receive
the best signal outdoors, while the Wi-Fi Hotspot remains indoors, or
because the Satellite Antenna needs to be placed at a point not easily
achievable when the base unit and antenna are joined.
Thuraya SatBridge Smart Terminal Specifications
This section serves as a reference guide, identifying the key operational aspects of using the
Thuraya SatBridge system along with the controls and indicators and their functions.
Physical Characteristics
Weight
8.8 lbs. / 4 kg (with full battery pack)
Size
14.0" x 11.0" x 2.65"
(355 x 279 x 67 mm)
Environmental
Operating Temperature
(on AC Power / External Battery)
Wi-Fi Hotspot
-20°C to 60°C
Satellite Antenna
-25°C to 60°C
Operating Temperature
(on Internal Batteries)
-10C to 60C
Battery Charging Temperature
0C to 40C
Storage Temperature
Wi-Fi Hotspot
-20°C to 60°C
Satellite Antenna
-40°C to 70°C
Humidity
5% to 95%, noncondensing
Ingress Protection
Wi-Fi Hotspot
IP 55
Satellite Antenna
IP 65
Vibration / Shock
MIL STD 810G, IEC 60668
External Power
Main Power Supply Adapter
Input: 100 – 240 V AC, 50 – 60 Hz
Output Voltage
12 V DC