SHOOTOUT 48" FOOSBALL TABLE ASSEMBLY INSTRUCTIONS Please Do N ot Hesitate to Contact Our Consumer H otline at 800-759-0 977 with Any Qu estions That May Arise During Assembly or Use of This P roduct! NG4031F
THANK YOU! Thank you for purchasing this product. We work around the clock and around the globe to ensure that our products maintain the highest possible quality. However, in the rare case of issues during assembly or use of this product, please contact our Consumer Hotline at 800-759-0977 for immediate assistance before contacting your retailer. Please read the warranty information at the back of these assembly instructions for further details.
PARTS IDENTIFIER (NOT TO SCALE) Please see Parts List at end of manual for part number when ordering parts. For replacement parts please call 800-759-0977.
ASSEMBLY TIPS 1. Find a clean, level surface to begin the assembly of your game table. The table will be partially assembled upside down and then turned over onto its legs. This is a heavy game and turning it over will require at least two strong adults. 2. Remove all of the contents from box and verify that you have all of the parts shown on the Note: Some parts may be pre-installed or pre-assembled. understand the text before beginning each assembly step. 4.
ASSEMBLY INSTRUCTIONS 1. Insert pre-assembled BLUE PLAYER RODS and GREEN PLAYER RODS into one SIDE PANEL #7 as shown below. Note: Although this table is assembled upside down, players are shown upright for clarity. Each team should face the opposite goal when table is turned over. Ensure that FOAM BUMPERS and PLASTIC ROD WASHERS are in place before inserting rods. Note: Players should face opposing goal when upright. EXAMPLE OF BLUE 3 PLAYER ROD ASSEMBLY: 2.
ASSEMBLY INSTRUCTIONS 5. Attach remaining END PANEL #8 to the opposite end of the table with 1-1/2" FLAT SCREW #5. Make sure PLAYFIELD slides into grooves on both END PANELS as well. 6. Attach each PLAYFIELD SUPPORT BRACE #23 across the underside of the PLAYFIELD by fastening to the SIDE PANELS with 1-1/2" SCREW #3 using pre-drilled holes. 7. Attach LEFT LEGS #10 and RIGHT LEGS #11 to the corners of the table as shown below using BOLT #1 and FLAT WASHER #2. Thread one LEG LEVELER #26 onto each LEG.
ASSEMBLY INSTRUCTIONS 8. Attach each LEG PANEL #12 to LEGS with 1/2" SCREW #4. Note: Graphics should face outward. Carefully turn table over. 9. Attach HAND GRIP #13 to the marked end of each PLAYER ROD. Attach ROD END CAP #22 to the opposite end of PLAYER RODS. 10. Attach one MANUAL SCORER #24 to each end of the table with 1-1/2" FLAT SCREW #5. Cut and remove rubber bands holding parts together, if present. Be careful not to overtighten screws.
CONGRATULATIONS! You have now assembled your Game Table. Please note the Care and Use instructions below to ensure years of trouble free use of your game table. CARE AND USE 1. This product is intended for INDOOR use only. 2. Do NOT sit, climb or lean on the table. 3. Do NOT drag the table when moving it as this will damage the legs.
180-DAY LIMITED WARRANTY This product is warranted to the original purchaser to be free from defects in material or workmanship for a period of 180 days from the date of the original retail purchase. This warranty does not cover defects or damage due to improper installation, alteration, accident or any other event beyond the control of the manufacturer. Defects or damage resulting from misuse, abuse or negligence will void this warranty.
48" FOOSBALL TABLE - NG4031F Parts List 18 20 17 16 9 24 15 25 14 10 8 7 23 22 13 26 11 12 PARTS #7 NGP6255 #8 NGP6256 #9 NGP6257 END PANEL SIDE PANEL #10 NGP5504 PLAYFIELD #11 NGP5505 LEFT LEG #12 NGP6258 LEG PANEL RIGHT LEG #14 NGP5508 #15 NGP5509 #16 NGP5510 #17 NGP5511 #18 NGP5512 #20 NGP5513 BLUE PLAYER* GREEN PLAYER* 2 PLAYER ROD* 3 PLAYER ROD* 5 PLAYER ROD* FOAM BUMPER* #23 NGP5515 #24 NGP5516 #25 NGP5102 #26 NGP50785 #13 NGP5507 HAND GRIP #22 NGP5514 ROD E
