PARK AVENUE 7' POOL TABLE WITH TABLE TENNIS & BENCHES ASSEMBLY INSTRUCTIONS Please Do N ot Hesitate to Contact Our Consumer H otline at 800-759-0 977 with Any Qu estions That May Arise During Assembly or Use of This P roduct! NG2530PR
THANK YOU! Thank you for purchasing this product. We work around the clock and around the globe to ensure that our products maintain the highest possible quality. However, in the rare case of issues during assembly or use of this product, please contact our Consumer Hotline at 800-759-0977 for immediate assistance before contacting your retailer. Please read the warranty information at the back of these assembly instructions for further details.
PARTS IDENTIFIER (NOT TO SCALE) #1 #2 #3 5/16" Black Flat Washer 32 Pieces 5/16"X1-1/4" Bolt 32 Pieces #5 #6 Table Tennis Top A 1 Piece #13 #18 #21 Bench Supporting Plate 4 Pieces Table Tennis Net & Posts 1 set Corner Basket 4 pieces #20 Table Tennis Racket 2 pieces #23 Cue Stick 2 Set Connecting Plate 8 Pieces #16 #19 #22 Billiard Ball 1 Set Leg 4 Pieces #15 Bench Ends 4 Pieces Table Body 1 Set #12 Table Tennis Top B 1 Piece Bench 2 Pieces Middle Basket 2 pieces Hex Wrench 1
ASSEMBLY TIPS 1. Find a clean, level surface to begin the assembly of your game table. The table will be partially assembled upside down and then turned over onto its legs. This is a heavy game and turning it over will require at least two strong adults. 2. Remove all of the contents from box and verify that you have all of the parts shown on the Note: Some parts may be pre-installed or pre-assembled. understand the text before beginning each assembly step. 4.
ASSEMBLY INSTRUCTIONS NOTE: The BALL BASKETS #16 & #17 have been pre-installed in table to protect them during shipping. You may have to temporarily remove them to install the LEGS #11 as described below. An alternative method is show in Fig. 1. 1. Attach LEGS #11 and CONNECTING PLATES #12 to the corners of the TABLE BODY as shown below using 5/16” BOLT #1 and 5/16” FLAT WASHER #2. NOTE: the table is assembled upside down. 2. Thread one LEG LEVELER #3 onto bottom of each LEG #11.
ASSEMBLY INSTRUCTIONS (CONT.) 5. Attach CORNER BASKET #16 and MIDDLE BASKET #17 to the pockets of the TABLE BODY #8 as shown below using 5/8” FLAT HEAD SCREW #6. #6 #8 #16 #6 #17 corner pockets when attaching corner baskets. This will catch screws, and keep them from falling into leg cavity, if you accidentally drop any. Make sure baskets are centered in opening before attaching. 6. To assemble TABLE TENNIS TOP, place TABLE TENNIS TOP A #9 and TABLE TENNIS TOP B #10 on top of assembled pool table.
ASSEMBLY INSTRUCTIONS (CONT.) 7. Attach one post of the TABLE TENNIS NET #18 to each side of the assembled TENNIS TABLE TOP at the center line, as shown below. Attach the net to each post.
CONGRATULATIONS! You have now assembled your Game Table. Please note the Care and Use instructions below to ensure years of trouble free use of your game table. CARE AND USE 1. This product is intended for INDOOR use only. 2. Do NOT sit, climb or lean on the table. 3. Do NOT drag the table when moving it as this will damage the legs.
180-DAY LIMITED WARRANTY This product is warranted to the original purchaser to be free from defects in material or workmanship for a period of 180 days from the date of the original retail purchase. This warranty does not cover defects or damage due to improper installation, alteration, accident or any other event beyond the control of the manufacturer. Defects or damage resulting from misuse, abuse or negligence will void this warranty.
PARK AVENUE 7' POOL TABLE SET - NG2530PR Parts List 18 9 10 9 10 15 16 3 17 13 8 14 11 12 TABLE BOTTOM PARTS #3 NGP50785 #8 NGP5954 #9 NGP5977 LEG LEVELER TABLE BODY TABLE TOP A #14 NGP5958 #15 NGP5959 #16 NGP5960 #17 NGP5961 BENCH ENDS BENCH SUPPORTING PLATE CORNER BASKET MIDDLE BASKET #21 NGP5136 #22 NGP5191 #23 NGP5135 #24 NGP5077 BILLIARD BALL SET 2-PIECE CUE STICK #10 NGP5978 #11 NGP5955 TABLE TOP B TRIANGLE LEG #12 NGP5956 CONNECTING PLATE #13 NGP5957 BENCH #1
