Specifications

SP8018 TRX SERVICING BEARINGS

Always clean tip of grease gun fitting and grease fitting on machine before attaching hose to

prevent dirt from being forced into machine parts.

There are four (4) bearings on the jackshaft;

two (2) mounted on the inside of the

supports and two (2) mounted on the outside

of the supports. These bearings should be

greased daily to keep dirt and moisture out.

These bearings should not be purged, only

use 2 to 4 shots of grease. PROPER

MAINTENANCE IS CRITICAL TO

ENSURE LONG BEARING LIFE.

There are two (2) bearings on the cutter

wheel shaft. These bearings should be

purged using grease EVERYDAY. Purge

until new grease is seen to keep dirt and

moisture out. PROPER MAINTENANCE

IS CRITICAL TO ENSURE LONG

BEARING LIFE.

** Your machine is lubed with Texaco® Starplex II grease when it is delivered from the

factory. Starplex® II is lithium complex soap grease, which contains a specially formulated

additive package to provide excellent rust protection, resistance to water washout and

extreme pressure properties. It is recommended as multipurpose, high performance grease

for severe duty industrial applications involving high temperatures, water contamination

and shock loading. Operating temperature range is from 450 F to -15 F.